Home>Products > Stainless Steel Ball Valve

2PC Screwed End Stainless Steel Ball Valve

Working pressure of 1,000 PSI (WOG) • S.S. 316 investment casting body • Blowout-proof stem • Locking device handle • NPT Threaded ends (ANSI B1.20.1) • Inspection Testing: API598 .100% leakage tested at 100PSI air under water

Send Inquiry

Description

Production Introduction

2PC Screwed End Stainless Steel Ball Valve
Item no.	SBV-04
Size	1/4" ~4" (DN8-DN100)
Material we can do	304 304L 316 316L CF8 CF8M CF3 CF3M
Material in stock	ASTM A351 CF8(304), ASTM A351M CF8M(316)
Thread	BS21 (BSPT&BSPP), ANSI/ASME B1.20.1 (NPT), DIN2999(R/RP), JIS B 0203/2(PT), KS B0221/2(PT), ISO228-1, ISO7-1,etc..
Design standard	API 608
Inspection standard	API 598, En12266
Testing	100% Leakage Testing
Rating	1000PSI PN 16
Temperature	-20-120 °C(PTFE),-40-180 °C (RPTFE),-150-300 °C (PPL)
Power	Manual Operated, Locking Handle Acceptable.
Handle Sleeve color	Blue, Yellow, Red for selection
Surface	Pickling and Peeling
Model	Ball Valve
Connection	Female Thread
Shape	Equal
Certificate	ISO 9001:2015, ISO14001:2015, CE, ROHS, KC, etc..
Application	Suitable for Air, Natural Gas, Oil, Steam, Water and so on.
Package	Cap to protect each thread end
	PVC bag for each valve and then put into small box
	Cartons without pallet for 100pcs
	Cartons with pallet for 500pcs
	Cartons with wooden boxes
	Or as buyer's requirements
Port	Ningbo/Shanghai, China
Delivery Details	According to the quantities and specifications of each order
	A complete stock to provide fast deliveries for small orders.
	Normal delivery times is from 30 to 50 days after receiving the deposit
Sample	Offer free samples and freight collected.
OEM and ODM	Accepted and professional. Buyer's drawing or designs are available
Material test report	is available upon request when placing order.

Product Description

The stainless steel 2 piece ball valve has one body joint which means the body is composed of 2 pieces, hence the name “two piece”. This 2 piece body allows a larger ball to be installed at the time of manufacture, which makes this a full bore or full port ball valve.Full bore means that the bore hole in the ball has the same inside diameter as that of the piping it is connected to. The advantage is that there is no pressure drop and flow rate is unaffected.They provide a simple on/off flow, as well as the ability to control flow rate by opening and closing to different degrees, this process is called throttling. Quick and easy to install, threaded valves are easy to use and require no tools for installation.

The two piece stainless steel ball valve is probably the most widely used ball valve. The two piece ball valve will open or shut off flow on most liquids and gases quickly and easily and is suitable for just about any application where a simple on/off action is needed. Flow rate can also be controlled by partially opening or closing the valve to various degrees. Also referred to as a two-way ball valve, since it allows flow in any direction straight through from inlet to outlet. This means that the 2 piece SS ball valve has no pressure drop and keeps the flow rate high.

●BSP or NPT Pipe Connection

●Lockable Handle Lever with Blow Out Proof Stem

●Pressure Rating up to 1000 PSI Suitable for Most Standard Uses

●PTFE Seal and Seat Good for Chemical and High Heat Applications

●Sizes Start from 1/4" up to 4"

Product Technical

NO	PART NAME	MATRIAL		QTY
NO	PART NAME	STAINLESS STEEL	CARBON STEEL	QTY
1	BODY	ASTM A351 Gr.CF8M	ASTM A216 WCB	1
2	CAP	ASTM A351 Gr.CF8M	ASTM A216 WCB	2
3	BALL	ASTM A351 Gr.CF8M	ASTM A351 Gr.CF8M	1
4	STEM	ASTM A276 Gr.316	ASTM A276 Gr.316	1
5	SEAT	PTFE	PTFE	2
6	PACKING	PTFE	PTFE	1
7	GLAND	S.S.304	S.S.304	1
8	END SEALS	PTFE	PTFE	2
9	THRUST WASHER	PTFE	PTFE	1
10	HANDLE	S.S.304	S.S.304	1
11	HANDLE SLEEVE	S.S.304	S.S.304	1
12	SPRING WASHER	S.S.304	S.S.304	1
13	BOLTS	ASTM A193 Gr.B8	ASTM A193 Gr.B8	1
14	BOLT NUTS	ASTM A194 Gr.B	ASTM A194 Gr.B	4
15	BOLT WASHER	S.S.304	S.S.304	4
16	HANDLE SLEEVE	VINYL GRIP	VINYL GRIP	4
17	LOCKING PLATE	S.S.304	S.S.304	1

More Products For Choosing

QQ20220119155738

FAQ

Q: Are you trading company or manufacturer?
A: We are manufacturer and trading company . We have specialized in manufacturing fittings and valves for more than 12 years.

Q: Can you OEM?
Yes, we can OEM according to your drawings.

Q: How long is your delivery time?
A: In stock -- 1 to 7 days
No stock -- 7 to 30 days
Depending on the quantity

Q: Do you provide samples ? Is it free or extra?
A: Yes, we could offer the sample. You need to pay for it and the freight cost.

Q: What is your terms of payment ?
A: Payment<=3000USD, 100% in advance. Payment>=3000USD, 30% T/T in advance, balance before

shipment.