Brass Push Button Valve

2. Types of Push Button Valves

Normally Closed (NC): The valve remains closed when the button is not pressed. Pressing the button opens the valve, allowing fluid or gas to flow. Releasing the button closes the valve again.

Normally Open (NO): In contrast, these valves remain open by default. Pressing the button closes the valve, stopping the flow.

Momentary Valves: These valves open only while the button is being pressed and close immediately after the button is released.

Latching Valves: These stay open or closed until the button is pressed again, useful for longer-duration flow control.

3. Operating Principles

Push to Open: In the "normally closed" configuration, the valve remains sealed by a spring-loaded mechanism. When the button is pushed, the internal mechanism moves to allow the fluid to flow. The spring then pushes the button back, closing the valve when released.

Push to Close: In a "normally open" configuration, the valve allows flow when the system is idle. Pressing the button closes the valve, stopping the flow of fluid or gas.

4. Applications

Plumbing and Sanitation Systems: Commonly found in sinks, showers, and urinals where water needs to be released on demand. These valves ensure water conservation by only allowing flow when the button is pressed.

Industrial Air and Pneumatic Systems: In pneumatic control systems, brass push button valves are used to control the flow of compressed air. Their durability makes them ideal for handling high-pressure environments.

Automotive Applications: Some push button valves are used in hydraulic or pneumatic systems in automotive or heavy machinery.

Laboratories and Medical Devices: Precision control of gases (like oxygen or nitrogen) or liquids in lab or medical settings.

Safety Devices: Emergency stop valves often incorporate push button mechanisms, especially in gas lines, where the flow needs to be halted immediately in case of an emergency.

5. Advantages of Brass Push Button Valves

Manual Control: Offers simple, direct control of the flow, reducing the need for complex automation in specific applications.

Reliability: Brass provides a robust and long-lasting solution for environments where valves are subjected to constant use.

Compact Design: Typically small and compact, these valves can fit into tight spaces in plumbing systems or industrial setups.

Easy to Operate: The push button mechanism is intuitive and requires minimal effort, making it suitable for public or industrial use.

6. Specifications

Depending on the specific model, brass push button valves can have varying specifications, including:

Flow Rate (Cv value): A measure of the flow capacity, typically ranging from low to medium values.

Maximum Pressure: Brass valves can generally handle pressures from 150 to 300 psi (pounds per square inch), though this varies by design.

Temperature Range: Brass push button valves are usually rated to handle temperatures between -20°C and 120°C (approximately -4°F to 248°F).

Port Sizes: Common sizes range from 1/8" to 1/2" NPT (National Pipe Thread) or BSP (British Standard Pipe) threads.

7. Installation and Maintenance

Installation: Brass push button valves are typically threaded for easy installation in piping systems. Some may have flanges or quick-connect fittings.

Maintenance: These valves usually require minimal maintenance, but seals or O-rings may need to be replaced periodically, especially if the valve is subjected to high pressure or aggressive media (e.g., acidic or alkaline fluids).

As one of the most professional brass push button valve manufacturers and suppliers in China, we're featured by good service and competitive price. Please rest assured to buy high quality brass push button valve in stock here from our factory.