Home>Products> Pressure Gauge Accessories > Pressure Snubber

Brass Porous Stone Pressure Gauge Snubber

Brass Porous Stone Pressure Gauge Snubber

1. O-ring :NBR ,FKM ,Viton
2. Thread connect :NPT , BSPP, BSPT
3. Temperature Rating :14°F to 248°F (-10°C to 120°C)

Send Inquiry

Description

Products Description

Brass Porous Stone Pressure Gauge Snubber installed on the fluid pipeline is a device to protect the instrument and pressure (temperature) transmitter. Based on the principle of capillary seepage pressure, it reduces the amplitude, hysteresis and damping of the water hammer (air hammer) generated instantly when the water pump (air pump) starts, cuts its peak value, and turns it into a small fluctuation harmless to the instrument and pressure (temperature) transmitter, so as to reduce the harm of water hammer to a low limit, It greatly prolongs the service life of instruments and pressure (temperature) transmitters

1. O-ring :NBR ,FKM ,Viton

2. Thread connect :NPT , BSPP, BSPT

3. Temperature Rating :14°F to 248°F (-10°C to 120°C)

4. Nominal pressures up to 400 bar

5. Media :Air, steam, gas, Light oil, water

6. Material :we can do 316ss. 304ss. Brass

When installing a gauge into a destructive circumstance, be sure to choose a pressure gauge and diaphragm seal combination appropriate for your application.
Gauges to be utilized on high temperature service ought to have a five foot or longer leg of pipe or tubing interfacing the gauge to scatter heat and secure the gauge measuring component from harm.
A gauge to be utilized on steam pressure benefit ought to be installed with a water filled pigtail steam siphon between the gauge and the steam line.
During installation and use, the adjustable pressure snubber adjusting nut can be adjusted appropriately with a wrench according to the actual pulse size, so that the screw in snubber ratio increases and the screw out damping ratio decreases

Order information