The valve core of a needle valve is a pointed cone shaped valve that resembles a needle, hence the name needle valve.

Why use a needle valve?
Needle valve is a type of valve that can accurately adjust and cut off fluids. Usually used in conjunction with a pressure gauge. It can withstand very high pressure and has excellent sealing performance, so it is generally used for sealing small flow, high pressure gas or liquid media.
Needle valves are generally divided into butt welding needle valves, socket welding needle valves, union welding needle valves, sleeve needle valves, threaded needle valves, combined valve cap needle valves, integral valve cap needle valves, and gauge valves.

Characteristics of needle valves
1. Two section valve stem design, with special chrome treatment on the upper valve stem thread and chrome polishing on the lower valve stem surface.
2. The up and down movement of the lower valve stem replaces spiral lifting, greatly reducing the total friction area of each stroke.
3. The non rotating lower valve stem avoids scratching the valve tip and seat during the closing process due to compression rotation.
4. The lubricating grease on the upper valve stem thread is isolated from the medium.
5. The valve has a back sealing function in the fully open position, and the sealing packing is not washed away by steam or fluid media, extending its service life.
6. The overall forging reduces the leakage points of the upper valve cover.
7. Each valve undergoes a sealing test with nitrogen gas at its rated working pressure before leaving the factory.

Composition of needle valve
The valve mainly consists of a locking nut, a cover, a gasket, a lower valve stem, an open pin, an upper valve stem, a valve cover, a valve seat, and a valve body.
Parameters of needle valve
1. Rod or forged valve body.
2. Valve body materials include 316, 316L, 304 stainless steel, F91 duplex steel, Monel alloy, and brass.
3. The sealing material is made of graphite.
4. The valve tip type can be trapezoidal, spherical, adjustable, or soft.
5. Interface 1/8 to 1 inch, M14 to M27 thread, 1/4 to 1 inch, 6mm to 25mm dual sleeve, 3/8 to 1 inch, 12mm to 28mm welded.
6. Inner diameters of 4mm, 6mm, 11mm, 15mm, and 20mm.
7. The maximum working pressure is 414 bar and 6000 PSI.
8. Working temperature -54 to 649 ℃, -65 to 1200 ℉.






